Duct Machines
Fully Automatic Self-Flanged Rectangular Duct Line
Fully automatic line producing TDF and TDC self-flanged rectangular ducts from coil with PLC control; 1200–1300 mm sheet, 6 m/min.
ViewOur Machines
Rectangular and spiral duct lines, seaming, flange, bending and cutting machines for HVAC duct fabrication.
Duct Machines
Single-Entry Rectangular Duct Machine
PLC-controlled duct machine that bends and cuts coil sheet to the required dimensions.
View
Duct Machines
Punch Rectangular Duct Machine
Rectangular duct machine with hydraulic punching that produces both slip-on flange and self-flanged ducts.
View
Duct Machines
Rectangular Duct Machine
Rectangular duct line developed for cross-cutting 1500 mm wide coil, with 3 decoilers.
View
Seaming and Closing
Seam Closing Machine
Closes the seams of square and rectangular ducts horizontally. KKP-01 / 02 / 03 models.
View
Seaming and Closing
Silicone Seam Closing Machine
Seam closing machine that applies silicone automatically while closing the seam — registered utility model (KKP-03).
View
Seaming and Closing
Pittsburgh Lock Former (9 Stations)
9-station Pittsburgh lock forming machine for duct fabrication; 4 roll sets as standard.
View
Seaming and Closing
Pittsburgh Lock Former (7 Stations)
Compact 7-station lock former; 0.5–1.2 mm sheet capacity.
View
Seaming and Closing
Motorised Seam Flattening Machine
KEM 130 (LS 13): flattens the longitudinal seams of round ducts with pneumatic pressure.
View
Flange Machines
Flange Machine FM01
Produces 20, 25, 30 and 35 flange profiles for rectangular HVAC ducts; 2 roll sets and silicone as standard.
View
Spiral Duct
Spiral Duct Machine
Spiral duct production from Ø80 to 1400 mm, compliant with EUROVENT and SMACNA standards.
View
Spiral Duct
Round Elbow Machine
Joins round elbow segments by seaming them with a hydraulic system.
View
Spiral Duct
Square-to-Round Machine
Pneumatic machine that forms a square-to-round transition in about one minute.
View
Bending and Forming
Cross-Breaking Machine
Adds rigidity to thin sheet. Models ZP01, ZP2.0 and ZP2.5.
View
Bending and Forming
2 mm Cross-Breaking Machine
Cross-breaking machine for sheet up to 2 mm with a 2500 mm working width.
View
Bending and Forming
Box and Pan Folding Machine
CMP 1260 and CMP 2060 models with 135° folding angle and 1.5 mm capacity.
View
Bending and Forming
Manual Folding Machine
Manual folding machine series with 1000–3000 mm working width and 1.2 mm capacity.
View
Bending and Forming
2 mm Hydraulic Folding Machine
Hydraulic folder for industrial duct fabrication; mild steel and painted DKP sheet ducts.
View
Bending and Forming
Manual and Motorised Plate Rolls
Rolling of material up to 2 mm; IR (motorised) and R (manual) series, 1050–2050 mm.
View
Bending and Forming
Beading Machine
Manual and motorised beading machines; 8 sets of standard rolls.
View
Cutting Machines
CNC Plasma Cutting Machine
3400×1500 mm cutting area, Camduct software, plasma cutting up to 6 mm.
View
Cutting Machines
Plasma Coil Feeding Machine
Feeds coil sheet to the plasma table, increasing productivity and saving material.
View
Cutting Machines
Guillotine Shears
Manual and motorised guillotine shears; KM 12 and KM 13 models, 1.5 mm capacity.
ViewSeaming and Closing
Vertical Seam Closing Machine
Vertical seam closing machine used to close duct seams.
ViewSeaming and Closing
Corner Flattening Machine
Corner flattening machine for duct corner joints.
View
Let's choose the right machine for your workshop together.
Share your duct sizes, sheet thickness and production targets, and we will get back to you with a suitable line configuration and a price offer.